Reiser4 Mirrors and Failover
Reiser4 will support logical (compound) volumes. For now we have implemented the simplest ones - mirrors. As a supplement to existing checksums it will provide a failover - an important feature, which will reduce number of cases when your volume needs to be repaired by fsck.
Reiser4 subvolume is a component of logical volume. Subvolume is always associated with a physical, or logical (built of RAID, LVM, etc means) block device. Every subvolume possesses:
. volume ID; . subvolume ID; . mirror ID; . number of replicas.
mirror ID is a serial number from 0 till 65535. Subvolume with mirror ID 0 has a special name - original. Other ones are called replicas. We use to say "original A has a replica B" (or "B replicates A", which is the same), iff A and B possess the same subvolume ID. Original with all its replicas are called "mirrors".
For subvolumes we have introduced a special disk format plugin "format41". In accordance with Reiser4 development model it means forward incompatibility. We have introduced it intentionally, for protection. Indeed, for clear reasons users must not have possibility to RW-mount separate replicas (without originals). The multi-device extension is backward compatible: all volumes of the old format (format40) are supported as logical volumes composed of only one (original) subvolume.
Registration and activation of subvolumes
For now every Reiser4 logical volume has only one original subvolume. Number of replicas can be 0, or more. Logical volume can be mount by usual mount command. Simply specify any its subvolume (the original, or some its replica). The only condition is that original and all its replicas should be registered in the system. If original, or some its replica are not registered, then mount will fail with a respective kernel message.
Currently there is no tool to register specified subvolume (TBD). However, mount command always tries to register the specified device. The registration policy is "sticky". It means that your device won't be unregistered after umount, as well as failed mount. (You will be able to unregister it mandatory by a special tool - TBD).
Procedure of registration reads the master super-block of the subvolume and puts the subvolume header to a specilal list of registered subvolumes.
Mounting a logical volume activates all its registered components. Procedure of activation reads format super-block of the subvolume, and performs other actions like initialization of space maps, transaction replay, etc. as specified by the method ->init_format() of respective disk format plugin. Pointer to an activated subvolume is placed to a special table of active subvolumes.
So mirrors (an original subvolume with all its replicas) actually represent RAID-1 on the filesystem level.
COMMENT. We aren't engaged in marketing fraud on collecting all features of the block layer's RAID and LVM. Reiser4 mirrors implement a failover, that block layers's RAID-1 is not able to provide.
It will be possible to "upgrade", or "downgrade" a reiser4 array of mirrors by attaching / detaching online one, or more replicas by special user-space tools (mirror.reiser4, TBD). Also by those tools it will be possible to swap original with any its replica, or make a new original from any replica, if the old one is lost for some reasons.
Fsck will refuse to check/repir replica. Fsck is supposed to work only with original subvolumes. After mounting an fsck-ed original, kernel will automatically run a special on-line backgroud procedure (scrub) in order to synchronize the repaired original with all its replicas.
Once in a while user has to check his array of mirrors by running scrub in the background mode.
WARNING: Bear in mind once and forever: Replica is not a backup!!!
1. Reiser4 Transaction Design document is transferred to logical volumes without any modifications, but with a small addition. Atom is now composed of per-subvolume components.
2. By design all mirrors differ only in mirror-IDs which are stored in master super-block. Format super-blocks of mirrors are identical. This approach provides best performance and full parallelism in issuing IO requests for mirrors. The minus is a small compromise in design, according to which master super-block doesn't participate in transactions. It means that mirror operations on upgrading/degrading/ swapping can not spawn usual transactions, which can be committed and (re)played using existing transaction manager. That is, mirror operations won't survive a system crash. If a system crash happens during a mirror operation, then the mirror structure should be checked/fixed offline by the mirror tools (kernel will refuse to mount unchecked array of mirrors). Fortunately, all critical mirror operations issue small number of IO requests, so that probability of their interruption is close to zero.
3. We don't commit transactions on all mirrors, only on the original subvolume (this is the single functional difference of original and its replicas). Transaction (re)play, of course, is going on all mirrors using the wandering maps/blocks of the original subvolume.
Every time when a block is loaded from disk to memory, Reiser4 verifies its checksum. If checksum verification failed, then Reiser4 immediately re-issues read IO request(s) against replica device(s).
How to test the feature
Checkout branch "format41" of the upstream reiser4 and reiser4progs git repos on https://github.com/edward6 Build and install as usual.
Mirrors can be created by mkfs.reiser4 option -m. If this option is specified, then the first listed device will be the original, other ones - replicas. All the specified devices should have the same size in sectors. Further we'll avoid that restriction.
IMPORTANT: when creating mirrors specify node41 plugin (with checksum support). Otherwise, your mirrors will be useful not more than block layer's RAID-1.
Register all your mirrors, trying to "mount" them one-by-one in any order. If you have N mirrors (i.e. one original and N-1 replicas), then first N-1 mount commands will fail. Of course, it is not too graceful, but this is temporal solution. The N-th "attempt" should succeed. Have a fun. Unmount as usual.
Suppose we have 2 partitions /dev/sda7 and /dev/sda8 of equal size. Let's create an array of 2 mirrors:
mkfs.reiser4 -my -o node=node41 /dev/sda7 /dev/sda8
Take a look at original subvolume:
Take a look at replica:
Register the original subvolume
mount /dev/sda7 /mnt mount: wrong fs type, bad option, bad superblock blablabla.... dmesg reiser4[mount(20914)]: check_active_replicas (fs/reiser4/init_volume.c:268)[edward-1750]: WARNING: /dev/sda7 requires replicas, which are not registered.
Register the replica and mount the array:
mount /dev/sda8 /mnt dmesg
reiser4: registered subvolume (/dev/sda8) reiser4 (sda8): found disk format 4.0.1. reiser4 (/dev/sda7): using Hybrid Transaction Model.
Let's copy a file /etc/services to our array of mirrors:
cp /etc/services /mnt/.
Unmount the array:
Find a root block: it goes the first in the tree dump:
debugfs.reiser4 -t /dev/sda7
In our case the root block has blocknumber #79
Let's now take a look on how our failover works. The death defying act: we erase the root block of the original subvolume:
dd if=/dev/zero of=/dev/sda7 bs=4096 count=1 seek=79
We know that the mount procedure load the root block. Let's try to mount our array with the corrupted root block:
mount /dev/sda8 /mnt
Everything works.. Take a look at kernel messages:
dmesg reiser4[mount(21224)]: __jload_gfp_failover[edward-1811]: WARNING: block 79 (/dev/sda7) looks corrupted. NOTICE: Loading from replica device /dev/sda8.
1) Mirror tools (upgrade/downgrade/synchronize an array of mirrors, swap original and specified replica, convert replica to an original subvolume, visualization of mirror arrays, etc);
2) Checksumming format super-block;
3) Issuing discard requests for replicas on SSD devices.